| Username | Profile | Boot | Logging | Services Start | SELinux | Service Manipulation | Comments |
|---|---|---|---|---|---|---|---|
| Enter result | Enter result | Enter result | Enter result | Enter result | |||
| 1111111111111 | |||||||
| 1111111111111 | "Profile" is for the environment you are testing it for, like KVM or Baremetal and which Fedora Version you are on. | ||||||
| 11h10 | Fedora Silverblue X86_64-29_Beta_1_1 into Gnome-boxes Fedora 29 Beta - Intel NUC5CPYH N3050 | ||||||
| 1~~~Example~~~1 | "Profile" is for the environment you are testing it for, like KVM or Baremetal and which Fedora Version you are on. | ||||||
| Csmithere | Bare Metal | [1] |
1.
Bare metal install onto a Razer Blade 2015 — HiDPI graphics work, system functions as I’d expect compared to F28. Will run it for awhile and update accordingly.
|
||||
| Journeyman | fedora/28/x86_64/silverblue via KVM | ||||||
| Renault | F29 x86_64 with GNOME Boxes | ||||||
| RiderExMachina | Baremetal | [1] |
1.
It works. No DNF, but can SSH and use systemctl. Wacom tablet gave a little trouble. Everything else works.
|
||||
| SJReese | Fedora Silverblue x86_64 29 Beta 1.5 KVM | ||||||
| alciregi | 29 Beta 1.5 on MacBookPro5,5 | ||||||
| anharris | VirtualBox 5 | ||||||
| arledrian | Flatpaked Boxes on Fedora 28 | ||||||
| bhavin192 | Beta 1.5 on KVM | ||||||
| crazypyro | 4.18.5-300.fc29.x86_64 Booting paravirtualized kernel on bare hardware | [1] |
1.
$ systemctl --all --failed
UNIT LOAD ACTIVE SUB DESCRIPTION
● mcelog.service loaded failed failed Machine Check Exception Logging Daemon
|
||||
| dasebek | Fedora Silverblue 29 Beta 1.5, KVM with Chipset Q35 and UEFI enabled | ||||||
| davisclick | Oracle VirtualBox 5 | ||||||
| dcsouthwick | Boot | ||||||
| dcsouthwick | Logging | ||||||
| dcsouthwick | SELinux | ||||||
| dcsouthwick | Service Manipulation | ||||||
| dcsouthwick | Services Start | ||||||
| eeqmcc | Fedora Silverblue 29 Beta 1.5 on Intel Celeron n3450 notebook | [1] |
1.
The `systemctl --all --failed` commands returns 'dbxtool.service loaded failed failed'
|
||||
| garrmcnu | Fedora Silverblue 29 Beta 1.5 on KVM | ||||||
| gfavaro | Baremetal fedora29 | [1] |
1.
#1,
gf:~/ $ systemctl --all --failed
UNIT LOAD ACTIVE SUB DESCRIPTION
● dbxtool.service loaded failed failed Secure Boot DBX (blacklist) u>
● s
witcheroo-control.service loaded failed failed Switcheroo Control Proxy serv>
|
||||
| haghighi | |||||||
| jakfrost | Rebased F28 to F29 | [1] | [2] | [3] | [4] | [5] |
1.
The usual boot messages regarding the non-standard AMD Phenom processor's.
2. I have reviewed the Boot logs, the installation log, the user logs all using journalctl and it seemed to be okay. 3. All of the usual services I deal with started well, though I am not an IT professional, am a developer though. 4. So far Selinux seems to be behaving correctly, again I am not an IT pro and haven't run into a use case where I had to make any changes to or be concerned about the operation of Selinux 5. Started and stopped different services today, everything I tried responded as expected |
| jakfrost | fedora/29/x86_64/silverblue | [1] |
1.
Since I did the rebase as my current user I assumed it would actually copy over my user information to include in the new ostree. It did this, however during initial startup of the new ostree it ran t
he first time new user setup, which I couldn't figure out how to skip. After setting up a superfluous user, I logged in with my preferred user account.
|
||||
| jakfrost | fedora/29/x86_64/silverblue on SMBIOS Gigabyte with AMD Phenom 6 core | [1] | [2] | [3] | [4] |
1.
See above - sorry for the extra stuff didn't fully specify my profile of the installation originally.
2. Checked boot log to find the usual complaints about the non-standard ACPI configuration my machine has (named pkg missing ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20180531/dspkginit-414). 3. I didn't have any services (I noticed) not starting as expected. I still haven't fully tasked my system since the install though, this may change after I do. 4. So far I haven't need to manipulate (ie start/stop/kill) services. |
|
| joem86 | Oracle VirtualBox 5 | [1] | [2] [3] [4] |
1.
User input was required for password. The instructions were to "Follow all defaults", which included a graphical environment, so expected result 3 was not tested.
2. #1631363, 3. Bug details entered at https://pagure.io/teamsilverblue/issue/43 4. #43, Additional details provided on the bug report. |
|||
| krouma | Leneóvo IdeaPad U410, Fedora Silverblue Beta 5 | [1] |
1.
dbxtool and switcheroo-control failed
|
||||
| lorenzodalrio | fedora/29/x86_64/silverblue | [1] |
1.
Rebased from Silverblue 28
|
||||
| lruzicka | Silverblue-ostree-x86_64-29-20180918 | ||||||
| lruzicka | Silverblue-ostree-x86_64-29-RC-1.5 | ||||||
| luya | Fedora 29 Beta running on Gnome Boxes | [1] |
1.
#1069652,
An old bug related to AMD CPUs which don't support mcelog.
|
||||
| malucious | Baremetal. Thinkpad T420 Fedora 29 Beta 1.5 | [1] | [2] |
1.
The system boots with no issues.
2. Enforcing |
|||
| mam | Fedora-Silverblue-ostree-x86_64-29_Beta-1.5 - VirtualBox 5.2.18 | ||||||
| merlinm | Fedora-Silverblue-ostree-x86_64-29_Beta-1.5.iso, KVM | ||||||
| merlinm | Fedora-Silverblue-ostree-x86_64-29_Beta-1.5.iso, KVM, virit-manager | ||||||
| mustafa | |||||||
| mustafa | Fedora-Silverblue-ostree-x86_64-29_Beta-1.5.iso on KVM (virt-manager) | ||||||
| nabooengineer | Fedora-Silverblue-ostree-x86_64-29_Beta-1.5.iso on VirtualBox Version 5.2.18 r124319 (Qt5.11.1) | ||||||
| nielsenb | Compaq 8510w BIOS Silverblue Beta 1.5 | ||||||
| pnemade | RC1.5 KVM 64bit | [1] | [2] |
1.
enforcing mode
2. can easily enable/disable start/stop services |
|||
| prakahmishra1598 | 29 beta ISO on Oracle virtualbox | [1] | [2] | [3] | [4] |
1.
Journalctl logs show up as expected
2. Works as expected 3. sudo getenforce returns 'Enforcing' 4. Services manipulation works as expected |
|
| prakahmishra1598 | ISO on Oracle virtualbox | [1] |
1.
The ISO boots to a graphical user interface after installation completes
|
||||
| rgoodall | Fedora-Silverblue-ostree-x86_64-29_Beta-1 on Gnome Boxes | [1] |
1.
system logging facility is working, ryslog not installed
|
||||
| sidewinder040 | |||||||
| sidewinder040 | fedora/29/x86_64/silverblue on Toshiba L350-170 | ||||||
| sinnykumari | Silverblue Beta 1.5 | ||||||
| spathare | RC1.5 on KVM | ||||||
| substance90 | Fedora-Silverblue-ostree-x86_64-29_Beta-1.1.iso on a desktop PC (Intel i5 6500, Samsung SSD) | [1] |
1.
The following error occurred while installing. This is a fatal error and the installation will be aborted.
mount ['--bind', '[/mnt/sysimage/boot/efi', '/mnt/sysimage/ostree/deploy/fedora-workstation
/deploy/478cb224043d9f5175ba282ffc787350a9c6e1ff46411e0f19f262bd60df97e93.0/efi'] exited with code 32
|
||||
| tagoh | RC1.5 on KVM | ||||||
| tek42 | |||||||
| tek42 | fedora/29/x86_64/silverblue on QEMU/KVM running on F28 | ||||||
| temjin747 | Host: Fedora 28 x86_64 running on HP Envy x360, AMD Ryzen 5 2500U APU. VM: Fedora 29 Silverblue Beta 1.1 on QEMU/KVM (2 vCPUs, 4 GB RAM) | [1] | [2] |
1.
Boots successfully, but performance is slow (animations, moving mouse is sluggish)
2. Failed service: Unit: mcelog.service Load: loaded Active: failed Sub: failed Description: Machine Check Exception Logging Daemon |
|||
| testuser123 | Fedora 29 Beta 1.5 on Virtualbox 5.2.10_Ubuntu r121806 | [1] [2] | [3] |
1.
After the login I am prompted to type the root password for software updates in EVERY boot!
2. Update software screen: I got a root authentication screen to update packages. 3. The user is not in the sudoers file by default so the test case is not correctly written. But the logs works perfectly! |
|||
| testuser123 | Version 5.2.10_Ubuntu r121806 on Virtualbox 5.2.10_Ubuntu r121806 | [1] |
1.
#2132,
#2131392,
Update software screen: I got a root authentication screen to update packages.
|
||||
| thebros35 | fedora/29/x86_64/silverblue Asus UX305 Core M Laptop | [1] | [2] |
1.
Booted perfectly with full disk encryption
2. #1508808, dbxtool.service fails to load. It seems to be the bug that I entered. I do not have secure boot enabled, and nothing seemed to be affected by it upon startup. |
|||
| ulmo | Silverblue Beta 1.5 via KVM | [1] |
1.
The command 'systemctl --all --failed' produced "lm_sensors.service loaded, failed, failed (Desc=Hardware Monitoring Sensors)"
|
||||
| unholyeyebrows | fedora/29/x86_64/silverblue Acer ES-1 laptop | [1] | [2] | [3] |
1.
Prompted to enter root password for software update when logging-in to Gnome most times which is a bit jarring. Would be neater to avoid this somehow.
2. Could not use sudo to check the log files due to my userid not being in the sudoers list. Ran it instead having first dropped into su. 3. systemctl --all --failed UNIT LOAD ACTIVE SUB DESCRIPTION ● dbxtool.service loaded failed failed Secure Boot DBX (blacklist) updater LOAD = Reflects whe ther the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. To show all installed unit files use 'systemctl list-unit-files'. |
||
| vishalvvr | RC1.5 on QEMU/KVM | ||||||
| wilbert-vb | Barebone - Fedora-Silverblue-ostree-x86_64-29_Beta-1.5 | ||||||
| wolnosc | Lenovo x1 carbon 2nd gen core i7 | [1] |
1.
i don't have inactive (not running) but inactive (dead). All same for the rest
|
||||
| zbyszek | amd64 KVM under libvirtd | [1] | [2] | [3] |
1.
#1631749,
2. #1631767, #1631772, #1631790, #1631794, 3. #1631801, |
| Username | Profile | install flatpak | gnome update notif | gnome software addons | rpm-ostree upgrade and rebase | rpm-ostree rebase | Comments |
|---|---|---|---|---|---|---|---|
| Enter result | Enter result | Enter result | Enter result | Enter result | |||
| 11h10 | |||||||
| 11h10 | Fedora Silverblue X86_64-29_Beta_1_1 into Gnome-boxes Fedora 29 Beta - Intel NUC5CPYH N3050 | [1] |
1.
nothing received
|
||||
| Renault | F29 x86_64 with GNOME Boxes | [1] | [2] | [3] |
1.
Firefox does not open automatically GNOME Software, otherwise everything works
2. No notif 3. Attempting to install Geary gave error "Unable to install Geary as runtime "sdk.gnome.org" not available". |
||
| SJReese | Fedora Silverblue x86_64 29 Beta 1.5 KVM | [1] | [2] | [3] | [4] |
1.
Firefox does not open the flatpakrepo file with the software application. It displays the contents of the flatpakrepo file as text. Installation via the command line works properly.
2. No notification was received. Output from pkman was: Transactions: [none] daemon connected=0 Failed to get properties: Error calling StartServiceByName for org.freedesktop.PackageKit: Timeout wa s reached 3. All applications I searched for were not found (wireshark, virt-manager, dia, gimp). Unable to install applications from All group. Attempting to install Geary gave error "Unable to install Geary as r untime "sdk.gnome.org" not available". 4. Some process started after I edited the /etc/ostree/remotes.d/fedora-workstation.conf file, but before I could run the 'sudo rpm-ostree rebase fedora/29/x86_64/silverblue' command. When I ran the rpm- ostree command I received: "error: System transaction in progress" I received that error for around an hour. The rebase process took around an hour. I'm speculating that the system ran the rebase upon the fedora-worstation.conf file being edited and saved, but I have no proof. Once I was able to run the rpm-ostree command, everything completed properly. |
|
| alciregi | 29 Beta 1.5 on MacBookPro5,5 | [1] | [2] |
1.
Firefox displayed the flatpakrepo file as a plain text, after downloading and opening the file everything worked as expected.
2. Installing applications from gnome nightly, like Calendar or Contacts, I get "Unable to install Calendar as runtime sdk.gnome.org not available" |
|||
| anharris | VirtualBox 5 | [1] | [2] |
1.
Firefox displayed the flatpakrepo as plaintext. Behaved as expected from command line and Nautilus.
2. All software fails to install with the error 'Unable to install X as runtime "sdk.gnome.org" is not available' |
|||
| arledrian | Flatpaked Boxes on Fedora 28 | ||||||
| bhavin192 | Beta 1.5 on KVM | [1] |
1.
Firefox opens the repo file as text file so saving the file and then opening it worked as expected.
|
||||
| dasebek | Fedora Silverblue 29 Beta 1.5, KVM with Chipset Q35 and UEFI enabled | [1] | [2] [3] |
1.
Firefox displayed the flatpakrepo file as a plain text, after downloading and opening the file everything worked as expected.
2. Unable to install Gnome Nightly flatpaks both in Gnome Software and in terminal. 'Unable to install "GNOME Web" as runtime "sdk.gnome.org" not available' message is shown. However, if installed from G nome Software, the failed app is then listed as installed with an Install button next to the entry in the Installed section. The Install button, in fact, wants to remove the app and fails because the app is not installed. Also, it's easy to get stuck on app details screen if Gnome Software window is closed when app detail is displayed. On the next startup the same page is shown, however, the back button doesn't work. Apps from Flathub work correctly, only runtimes installed with the app are not removed with the app and kept installed. 3. Unable to install Gnome Nightly flatpaks both in Gnome Software and in terminal. 'Unable to install "GNOME Web" as runtime "sdk.gnome.org" not available' message is shown. However, if installed from G nome Software, the failed app is then listed as installed with an Install button next to the entry in the Installed section. The Install button in fact wants to remove the app and fails because the app is not installed. Also, it's easy to get stuck on app details screen if Gnome Software window is closed when app detail is displayed. On next startup the same page is shown, however, the back button doesn't work. |
|||
| dcsouthwick | install flatpak | [1] |
1.
gnome-software does not open firefox link. gnome-software does not list "gnome" in list after command line operation
|
||||
| eeqmcc | Fedora Silverblue 29 Beta 1.5 | [1] |
1.
The gnome-nightly-apps.flatpakrepo file opens in browser tab as a text. (And one form flatpak.org site opens in gnome-software). gnome-software cannot install apps because doesn't find gnome runtime.
|
||||
| gfavaro | Baremetal fedora29 | [1] |
1.
The software shows a notification but after the suggested reboot, the update was not installed ans software still showing then.
|
||||
| haghighi | [1] | [2] | [3] [4] | [5] [6] |
1.
File opened as plain text
2. Nothing about updates, Gnome-Software only show available packages 3. Too slow 4. Nothing 5. It's OK 6. Output: GPG signatures found, but none are in trusted keyring |
||
| hobbes1069 | [1] |
1.
gnome-software showed one upgrade and one downgrade but both were shown multiple times, see:
https://hobbes1069.fedorapeople.org/VirtualBox_Fedora%20Live_18_09_2018_07_05_21.png
|
|||||
| jakfrost | Rebased F28 to F29 | [1] | [2] | [3] | [4] [5] | [6] |
1.
Installed several flatpaks, as well as setup the Evolution flatpak as per the directions on the Gnome site. I all worked as expected. There is a strange thing that happened once, and I couldn't get it
to repeat so I am not sure it is a bug or not, however when closing out Evolution I was unceremoniously kicked back out of Gnome to the login screen. I tried to get it to repeat, with no success.
2. I am saying this passes because it does notify you that there are updates (whether kernel or flatpak) however, if you try to use software to perform the actual update it fails, everytime. 3. I'm not sure if this is pass or fail since the only thing I can see in addons are the extensions, no fonts, codecs, etc... 4. rpm-ostree update worked fine 5. Again there is a caveat. I was able to rebase from F28 Silverblue to F29 but when the rebase was done and I booted into the new ostree it wouldn't let me proceed without creating a new user. 6. Rebase worked just forced me to add a new user at first boot of the new image. |
| jakfrost | fedora/29/x86_64/silverblue on SMBIOS Gigabyte with AMD Phenom 6 core | [1] | [2] [3] [4] | [5] |
1.
Installed several flatpaks, no problems
2. Gnome Software is reporting an update to the OS, which includes f29-backgrounds both base and gnome, libudisks2, mdadm, python3-gobject & python3-gobject-base, udisks2, qt-settings, and zsh. The updat e fails with the following message, although will continue through with the reboot if selected. 'Unable to update "OS Updates": GDBus.Error:org.projectatomic.rpmostreed.Error.Failed: No such metadata object a23e4ae8e474231b0b169748db1c7ece05da9ebc1c02d895e14ec1e055381f76.dir tree 3. I have not recieved an update notification as of today's date (September 16, 2018). 4. I cannot get the addons to appear in software. There is no info under the addons selection other than extensions 3. Gnome Software is reporting an update to the OS, which includes f29-backgrounds both base and gnome, libudisks2, mdadm, python3-gobject & python3-gobject-base, udisks2, qt-settings, and zsh. The updat e fails with the following message, although will continue through with the reboot if selected. 'Unable to update "OS Updates": GDBus.Error:org.projectatomic.rpmostreed.Error.Failed: No such metadata object a23e4ae8e474231b0b169748db1c7ece05da9ebc1c02d895e14ec1e055381f76.dir tree 4. I have not recieved an update notification as of today's date (September 16, 2018). 5. I cannot get the addons to appear in software. There is no info under the addons selection other than extensions |
||
| joem86 | Oracle VirtualBox 5 | [1] | [2] | [3] | [4] |
1.
Browser opened the file as plaintext, so the repo was added on the command line.
2. * 'Unable to install "GNOME Tweaks" as runtime "sdk.gnome.org" is not available' * Cannot remove any applications since none were installable * Attempt to install pick "Polari" failed with same erro r as in 1. * Manual check for updates failed: Unable to get list of updates: GDBus.Error: org.projectatomic.rpmostreed.Error.Failed: Upgrade target revision '5b446f422be3253a43741af81fd5d1b6bebdd46b7c5a022ccc4c6930fe192ce5' with timestamp 'Tue 18 Sep 2018 11:29:40 AM UTC' is chronologically older than current revision 'd5b60890b8c319c87622575fe6d31bf32fd4a135949c81e5ce98481b8ece9c6f' with timestamp 'Thu 20 Sep 2018 01:13:35 AM UTC'; use --allow-downgrade to permit 3. Fresh install, running rpm-ostree upgrade failed with the following error: error: Upgrade target revision '5b446f422be3253a43741af81fd5d1b6b3bdd46b7c5a022ccc4c5930fe192ce5' with timestamp 'Tue 18 Sep 2018 11:29:40 AM UTC' is chronologically older than current revision 'd5b60890b8c319c87622575fe6d31bf32fd4a135949c81e6ce98481b8ece9c6f' with timestamp 'Thu 20 Sep 2018 01:13:35 AM UTC'; use --allow-downgrade to permit 4. Fresh install of FAW 28 upgraded to Silverblue 1.5 Beta appears identical to a fresh install of Silverblue 1.5 Beta |
|
| krouma | Leneóvo IdeaPad U410, Fedora Silverblue Beta 5 | ||||||
| lorenzodalrio | fedora/29/x86_64/silverblue | [1] | [2] | [3] |
1.
Firefox did not handle flatpakrepo file and did not open Software
2. The notification appears, when clicked it opens software, the update proposed was f29-backgrounds. The same line was repeated many times in Software. The update failed when run with Software. 3. Flatpak auto-update features is working fine |
||
| lruzicka | Silverblue-ostree-x86_64-29-RC-1.5 | [1] |
1.
Attempting to install Geary gave error "Unable to install Geary as runtime "sdk.gnome.org" not available".
|
||||
| luya | Fedora 29 Beta running on Gnome Boxes | [1] [2] |
1.
Failed to open in Firefox which is not configured to handle flatpakrepo extension
2. Opened a plain text file |
||||
| merlinm | Fedora-Silverblue-ostree-x86_64-29_Beta-1.5.iso, KVM, virit-manager | [1] | [2] | [3] | [4] |
1.
Firefox displayed gnome-apps-nightly.flatpakrepo as text, but "flatpak remote-add ..." completed successfully.
2. Ran "gsettings" and "touch" commands to shorten wait time and rebooted. No notification ever received. Confirmed "gnome-apps-nightly" appears in list of repositories displayed by "software". pkmon re ported: Transactions: [none] daemon connected=0 Failed to get properties: Error calling StartServiceByName for org.freedesktop.PackageKit: GDBus.Error:org.freedesktop.DBus.Error.TimedOut: Failed to activate service 'org.freedesktop.PackageKit': timed out (service_start_timeout=25000ms) 3. Browsed for, viewed, and attempted to install software application GNOME Dictionary. Install failed with following message: Unable to install "GNOME Dictionary" as runtime "sdk.gnome.org" not availabl e. 4. Initial "sudo rpm-ostree upgrade" reported "No upgrade available.". Reboot succeeded. fedora-workstation.conf already contained the updated gpgkeypath, so no rebase was possible. |
|
| mustafa | Fedora-Silverblue-ostree-x86_64-29_Beta-1.5.iso on KVM (virt-manager) | [1] | [2] | [3] |
1.
I didn't enable sudo for the user during installation, I usually use non-admin user or root, so some problems might arise from this:
* Firefox didn't open the link, I had to add it manually from the
terminal
* I tried to install gedit (Nightly) from the added repo using gnome-software, it didn't work, I got the message 'Unable to install gedit as runtime "sdk.gnome.org" not available'
* I got gnome-apps-nightly in the gnome-software sources, which is the correct (expected) behavior.
2. Looks like my mirror brought me an older version of metadata, so "Unable to get a list of updates", GDBus.Error:org.projectatomic.rpmostreed.Error.Failed: Upgrade target revision 'some_checksum' with timestamp 'some_timestamp 18-september' is chronologocally older than the current revision 'some_other_checksum' with 'some_other_timestamp 20-september'; user --allow-downgrade to permit 3. I couldn't install VLC using flatpakref file, Software said "Failed to install file: not supported", but I could install flatpakrepo file, so I added flathub this way Still, couldn't find flathub app s in Software, using flatpak command, I got some timeouts, but Software never complained, and didn't show any apps Web apps (e.g. twitter) found in search, installed, and removed normally. Also software sources work fine |
||
| nabooengineer | Fedora-AtomicWorkstation-ostree-x86_64-28-1.1.iso on VirtualBox Version 5.2.18 r124319 (Qt5.11.1) | [1] | [2] |
1.
Very slow rebase upgrade, otherwise went fine.
2. Worked fine, just extremely slow doing the rebase to 4.18.5-300.fc29.x86_64 base |
|||
| nabooengineer | Fedora-Silverblue-ostree-x86_64-29_Beta-1.5.iso on VirtualBox Version 5.2.18 r124319 (Qt5.11.1) | [1] | [2] |
1.
Does not appear there is anything to update, however I did notice this:
[michael@localhost ~]$ pkmon
Transactions:
[none]
daemon connected=0
Failed to get properties: Error calling StartServic
eByName for org.freedesktop.PackageKit: GDBus.Error:org.freedesktop.DBus.Error.TimedOut: Failed to activate service 'org.freedesktop.PackageKit': timed out (service_start_timeout=25000ms)
2. Unable to install "GNOME Web" as runtime "sdk.gnome.org" not available, Unable to install News as runtime "sdk.gnome.org" not available |
|||
| nielsenb | Compaq 8510w BIOS Silverblue Beta 1.5 | [1] | [2] |
1.
Firefox does not open the repo file. Installing the repo file manually succeeds, but attempting to install any software through Gnome Software fails with 'Unable to install...as runtime "sdk.gnome.org
" not available'
2. Update notification never appears, but checking for updates manually with Gnome Software shows no updates available. A dialog asking for the root password for software updates appears on every boot, a nd appears again when checking for updates with Gnome Software. |
|||
| petersen | VM on F28 | [1] |
1.
It took a long time for the Flathub packages to appear in Gnome Software - not sure how long (they appeared the same day at least)
|
||||
| pnemade | F28 Atomic Workstation KVM 64bit | [1] | [2] | [3] | [4] |
1.
Its obvious that using RC 1.5 we will not get any update. So picked the f28 rebased f29 system. I did not get any notification so used "rpm-ostree update" and it worked. Got a small update and system
got updated from 29.20180916.n.0 to 29.20180918.n.0 tree
2. Its obvious that using RC 1.5 we will not get any update. So picked the f28 rebased f29 system. I did not get any notification so used "rpm-ostree update" and it worked. Got a small update and system got updated from 29.20180916.n.0 to 29.20180918.n.0 tree 3. As there is no way to track System transaction progress, I had to cancel it and manually did "rpm-ostree upgrade". It worked. Both the upgrade and rebase repo downloads were tremendously slow. 4. The rebase download was very slow |
|
| pnemade | RC1.5 KVM 64bit | [1] |
1.
Installed manually gnome-apps-nightly repo but unable to install any application due to missing sdk.gnome.org
|
||||
| prakahmishra1598 | 29 beta ISO on Oracle virtualbox | [1] | [2] | [3] |
1.
Opening the link in firefox led to a plain text page with the repo file. Software did not show updates. When I clicked on refresh on the top bar, an error occurred: Unable to get a list of updates, <-
-- long error message ---> saying update target revision is chronologically older than current revision. use --allow-downgrade to permit
2. No notifications shown on login. When I click refresh in 'Software' a pop up appears:Update target revision '5b446f422be3253a43741af81fd5d1b6b3bdd46b7c5a022ccc4c5930fe192ce5' with timestamp 'Tue 18 Se p 2018 11:29:40 AM UTC' is chronologically older than current revision 'd5b60890b8c319c87622575fe6d31bf32fd4a135949c81e6ce98481b8ece9c6f' with timestamp 'Thu 20 Sep 2018 01:13:35 AM UTC'; use --allow-downgrade to permit 3. I get a pop-up in 'Software' saying - Unable to install 'gedit' as runtime 'sdk.gnome.org' not available |
||
| sidewinder040 | fedora/29/x86_64/silverblue on Toshiba L350-170 | [1] |
1.
PackageKit Timeout Error = 'Failed to get properties: Error calling StartServiceByName for org.freedesktop.PackageKit: GDBuss.Error:org.freedesktop.DBus.Error.TimedOut: Failed to activate service ...
timed out (service_start_timeout=2500ms
|
||||
| sinnykumari | Silverblue Beta 1.5 | [1] | [2] | [3] [4] |
1.
Fails to install gnome-apps-nightly repo by opening https://sdk.gnome.org/gnome-apps-nightly.flatpakrepo in firefox. Adding repo from terminal `sudo flatpak remote-add --if-not-exists gnome-apps-night
ly https://sdk.gnome.org/gnome-apps-nightly.flatpakrepo` works fine
2. F28 Silverblue upgrade and then rebase to ref fedora/29/x86_64/silverblue works fine 3. I think due to slow mirror, it sometimes fails to rebase as well. Saw following errors during two attempts: 1. Receiving metadata objects: 183/(estimating) 46.4 kB/s 2.0 MB error: [56] Failure when receiving data from the peer 2. Receiving metadata objects: 783/(estimating) 8.6 kB/s 1.3 MB error: [35] SSL connect error 4. Rebase from F28 Silverblue to ref fedora/29/x86_64/silverblue works fine for both automatic and custom partitioning |
||
| tek42 | [1] |
1.
Browser did not open software installer.
flatpakrepo is not associated with software installer.
|
|||||
| tek42 | fedora/29/x86_64/silverblue on QEMU/KVM running on F28 | [1] | [2] | [3] |
1.
Browser did not open software installer. flatpakrepo is not associated with software installer.
2. No updates prompt shown after over one hour after running commands to shorten wait time. PKMON shows the following error "Failed to get properties: Error calling StartServiceByName for org.freedeskto p.PackageKit: GDBus.Error:org.freedesktop.DBus.Error.TimedOut: Failed to activate service 'org.freedesktop.PackageKit': timed out (service_start_timeout=25000ms)" Software app shows OS updates. choosing restart and update results in the following popup error "Unable to update "OS Updates": GDBus:Error:org.projectatomic.rpmostreed.Error.Failed: Checking out deployment tree: No such metadata object 26eb1a3a0aa73575f0d4cec6cc61e4bf7a0aa729c067abde8d616705c1a6c99.dirtree" 3. No applications could be found. Browsing categories had no results. |
||
| temjin747 | Host: Fedora 28 x86_64 running on HP Envy x360, AMD Ryzen 5 2500U APU. VM: Fedora 29 Silverblue Beta 1.1 on QEMU/KVM (2 vCPUs, 4 GB RAM) | [1] | [2] | [3] | [4] | [5] |
1.
Was not able to install repo file using Firefox.
Running terminal command gives no output. Software repositories show gnome-apps-nightly repo's URL as https://sdk.gnome.org/nightly/repo-apps.
Instal
ling Calendar (nightly failed with message: Unable to install Calendar as runtime "sdk.gnome.org" not available
2. No notification shown. Running the commands, rebooting, and then running pkmon shows the following: Transactions: [none] daemon connected=0 Failed to get properties: Error calling SystemServiceBy Name for org.freedeskop.PackageKit: Timeout was reached 3. Installing and removing Telegram worked, but not for Gnome applications like Geary. Installing would fail with message: Unable to install "<app name>" as runtime "sdk.gnome.org" not available." 4. rpm-ostree upgrade and rpm-ostree rebase ran fine. However, after I enter credentials and log in, I get stuck on a black screen. No desktop shows up. I have to switch tty's and then the desktop shows up after going back to tty2. 5. Running the rebase command fails with the following message: error: System transaction in progress |
| testuser123 | Fedora 29 Beta 1.5 on Virtualbox 5.2.10_Ubuntu r121806 | [1] |
1.
Firefox opened the link as text. If I try to install any software I am getting the error "Unable to intall THE_PACKAGE as runtime "sdk.gnome.org" not available
|
||||
| thebros35 | fedora/29/x86_64/silverblue Asus UX305 Core M Laptop | [1] |
1.
Firefox did not open the repo in software. If I downloaded the repo it loaded into Software like expected.
|
||||
| ulmo | Silverblue Beta 1.5 via KVM | [1] |
1.
Test cases and expected results worked, however clicking the back navigation button [<] within the Software app appeared to have no effect.
|
||||
| unholyeyebrows | fedora/29/x86_64/silverblue Acer ES-1 laptop | ||||||
| wilbert-vb | Barebone - Fedora-Silverblue-ostree-x86_64-29_Beta-1.5 | ||||||
| znmeb | [1] | [2] |
1.
#1620584,
Same issue as the case without upgrading Silverblue 28 first - again, see https://bugzilla.redhat.com/show_bug.cgi?id=1620584. This time around I captured a traceback. Seeing "radeonsi_dri.so" in the
traceback makes me suspect the GPU software - the machine has an AMD Sea Islands card and is using the "radeon" kernel module.
2. #1620584, This looks like https://bugzilla.redhat.com/show_bug.cgi?id=1620584. I have this issue on only one of my two systems, so I think it's graphics-card related. I have yet to make this scenario (rebase fr om 28 to 29) work on this system. However, a fresh install with the 1.3 beta ISO comes up in Silverblue 29 with no problems. |
||||
| znmeb | AMD FX(tm)-8350 Eight-Core Processor, 32 GB of RAM, VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Bonaire XT [Radeon HD 7790/8770 / R7 360 / R9 260/360 OEM], Silverblue 28 | [1] |
1.
If I install Silverblue 29 from Beta 1.3 ISO, flatpaks install just fine. But I can't rebase from 28 to 29
|
||||
| znmeb | Arch Linux host, Virtual Machine Manager 1.5.1, qemu 3.0.0-1, libvirt 4.6.0-3 | [1] |
1.
Everything works just fine in Silverblue 29 Beta 1.5 - my container workflow is totally operational
|